Post any WireTap Studio support related issues here.
John Casasanta
MacHeist Director
tap tap tap chief
Have downloaded WireTap Studio included in the MacHeist 3 package. Am running MacOS 10.5.6 on a Mac Pro. The .mpkg will will not expand and when I drag into Stuffit Expander it give the following message: "An error occurred attempting to expand/Volumes/WireTap Studio/WireTapStudio.mpkg (A folder was specified when a file was required (Effor #17530).
Please provide help
How do we get our license? Does it come in the form of an email? I haven't seen one yet...
What Is the difference between this and Audio Hijack Pro?
Post any WireTap Studio support related issues here.
have printed name and license exactly as shown on receipt but tells me license is invalid
wher is the license for this software or do i get a email ?
The license code as posted, E6LA-N7EY-S3G9, doesn't work. This seems to happen every time I buy one of these bundled software 'opportunities'. It always turns into a hassle, leaving me vowing not to do it again. But oh, no, THIS time will be different.....not so much.
Has anyone had any success uploading a ringtone to a phone via bluetooth and this software only? I am getting some cryptic -21850 error.
Stay Classy Green Monkeys
twitter || Green Team @MacHeist
rampancy FTW
SysAdmins' Chronicles
I purchased the bundle prior to the first "unlock" for WireTap.
How do I obtain my license for it?
User ID and license code entered by paste and copy. Response: Invalid
• Downloaded the WireTap Studio .dmg file
• Ran the installer and chose Customize.
• Customize has Ambrosia Audio Support folder and a bunch of broken trialware.
• There is no apparent ability to install WireTap Studio from the Customize pane, and there is no apparent ability to avoid installing the broken trialware.
How do I install WireTap Studio without the broken trialware?
Thanks.
• Downloaded the WireTap Studio .dmg file
• Ran the installer and chose Customize.
• Customize has Ambrosia Audio Support folder and a bunch of broken trialware.
• There is no apparent ability to install WireTap Studio from the Customize pane, and there is no apparent ability to avoid installing the broken trialware.How do I install WireTap Studio without the broken trialware?
Thanks.
Never mind -- I dug into the installer package, double-clicked the WTS package, and installed it from there. Seems to be working OK. Not a user-friendly process, but the app looks pretty cool, and it was the app I bought the bundle for, so as long as this end run keeps working, I'm happy.
I bought the bundle prior to reaching the $200,000/Wiretap unlock. I don't seem to be able to find the registration info. I've looked at my receipt (email and online) and it's not there.
Any help would be appreciated.
27 March 2009 Update: I received a new email with the Wiretap info. I actually received a new receipt that showed everything purchased, unlocked and still locked.
Way to go Directorate!! Thanks
BLUE Team™ ![]()
Have just downloaded Wirtap Studio And at first it couldn't locate the Library.
The system locatedit and Iopened it.
Then got the message that my trial period had expired - after maybe 25 mnutes! - and I am expected to buy a license.
What's gone wrong? (OS 10.5.5)
I got wiretap in a previous MacHeist package but no password/license nº so when I recently upgraded, I had to subscribe - NOW I'm being asked to subscribe again!.
Where do I go from here?
Cool - all sorted - thanks a million
Well, today i received all the serials but WireTap Studio tells me, that the serial number is invalid. Copy and Paste. Now what?
i bought wiretap within the macheist bundle.
when i try to register it tells me that my code is invalid.
i have tried copy and paste from the macheist receipe site, and also i did habe tried typing it myself - it is still telling me that the code is invalid.
loving the bundle! not sure what to do about the double charge on my account though - are you going to refund? please contact me via email! thanks, guys, have a great day. xx
---
"I am not young enough to know everything." (Wilde)
http://buildingthelifeyouwant.wordpress.com
Hi
I purchased the MacHeist bundle today (March 30th). The registration code is reported as invalid by the Wire Tap Studio registration screen. Now what?
I downloaded the package an ran the installer. It appears as though the installer saw my previous version of the application WireTap Pro and it tried to preform an upgrade. The installer completes, but the application keeps on crashing and won't open. I still have WireTap Pro and it still opens.
I've registered WireTap Studio but when I'm recording it cuts out thru out the recording telling me that I have a demo. Also, I can't "crop to selection", the buttons are grayed out.
Where do I put the registration number, after I have paid for and down loaded it.
Thank you CJ
I successfully downloaded wiretap studio
But i am being presented a screen as if I'm seeking a trial copy. i already paid for the bundle 39.99 or whatever
Why is my single copy of the code being rejected??
Did I have to register? At time of purchase, 430est pm I was not registered. I register before 500pm
Please help
thanks
I purchased the bundle. JUst realized Wire Tap is included. Already have a license to the software. If I want to give it a friend (I have a couple of folk who just purchased their first Mac!), can I simply give the serial number?
Or , how do I transfer registration?
Thank you
Barbara Passman
At the end of installation I got a kernel panic and had to reboot. Brand new mac pro quad core. Here's the stack, it's coming from the driver. Note that I had to escape the 'at' signs below because this silly board software thinks they are email addresses, and it believes that because I'm new I shouldn't be posting email addresses.
How do I fully uninstall this software?
Problem Details
Tue Apr 7 07:47:08 2009
panic(cpu 7 caller 0x003EDB00): OSMetaClassPanicMsg at /SourceCache/xnu/xnu-1228.10.33/libkern/c++/OSMetaClass.cpp:215
Backtrace (CPU 7), Frame : Return Address (4 potential args on stack)
0x844ffbb8 : 0x12b4c3 (0x45d7fc 0x844ffbec 0x133542 0x0)
0x844ffc08 : 0x3edb00 (0x49faec 0x2 0x24 0x0)
0x844ffc28 : 0x844cb5d0 (0xbd1aa00 0xb866084 0x2174d7c 0x1938f00)
0x844ffc98 : 0x844cc3f8 (0x1b314640 0x7a16b010 0x0 0x200)
0x844ffd08 : 0x844cc7e4 (0x1b314640 0x7a16b010 0x0 0x200)
0x844ffd58 : 0x844cd8d8 (0x1b314640 0xba29c00 0x10294108 0x18ae)
0x844ffdc8 : 0xbf872b3 (0x1c145220 0x7a1c3ee8 0xba29c00 0x10294108)
0x844ffe68 : 0x7a1bf18a (0xbeda000 0x18ae 0xe5b 0xe3a2a80)
0x844ffea8 : 0x44172e (0xbeda000 0x18ae 0xe5b 0x0)
0x844fff08 : 0x19800d (0x844fff44 0x0 0x0 0x0)
0x844fffc8 : 0x1a0d5a (0x1093aba0 0x1 0x1a30b5 0xc40d048)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0a89b58
Kernel loadable modules in backtrace (with dependencies):
com.AmbrosiaSW.AudioSupport(2.3.9)'
dependency: com.apple.iokit.IOAudioFamily(1.6.5fc5)
com.apple.iokit.IOAudioFamily(1.6.5fc5)
dependency: com.apple.kext.OSvKernDSPLib(1.1)
Anyone have any feedback regarding gifting this software after purchasing it? AmbrosiaSW won't do a registration switch (I already contacted them)
Anyone given an app to someone else while it was still registered to them?
Thanks
J
Proud to be Purple .:. Be Different ~ Be Yourself
| Dropbox referrals
I'm having all kinds of issues getting this program installed. Initially, I downloaded the 1.08 version via the MacHeist receipt. Upon running the MPKG installer, it would get to the point where you click the "Install" button, but would go no further. If you click "Install", the button greys out momentarily like it's trying to do something, then shortly after goes back to normal (and is clickable). You can do this over and over--nothing.
Thinking maybe there might be an updated version, I downloaded the 1.09 version from the publisher's website. Same results unfortunately.
Any ideas? I'm running a 2.0GHz Unibody Macbook running 10.5.6.
anyone help?? I was just playing with it a moment ago and now my mac doesn't produce any sound anymore!!
PLease anyone? can any reply me soon? i am really worry right now.. i just got this mac for 3months.. now my speaker isn't working at all. I dunno why? i went to system preferences and have a look at output but can't do much.. PLEASE some one help me??
I posted a question- where is the response???
Anyone have any feedback regarding gifting this software after purchasing it? AmbrosiaSW won't do a registration switch (I already contacted them)
Anyone given an app to someone else while it was still registered to them?
Thanks
J
I've got the same question as well. Any response regarding this would be appreciated.
Just like DL2. 2 bundles, 2 matching serial numbers. ![]()
FREE Dropbox Storage Use link for EXTRA space for you and me. ![]()
15.4" 2.5GHz 4GB MacBook Pro, 32GB iPhone 3GS